I/O Modules
The I/O modules of the MCM series from Graf-Syteco are integrated into CAN bus systems and expand the control-related functional range of the operating/control units and the controls by decentralization. Due to their housing with a high degree of protection, they can be used decentrally at many locations on the mobile working machine without the need for a control box.
The MCM modules are equipped with different I/O's for sensing sensors or controlling actuators.
All MCM modules have E1 approval and can be installed on any road vehicle. For parameterization and configuration via CAN bus the software tool "GSUtility" included in GSe-VISU® is available.
- 4 digital inputs
- 4 digital PWM outputs
- 4 analog inputs
- 8 digital in-/outputs, switchable
| DB MCM200 DE EN 2.1 |
- 10 analog power inputs
- 6 analog power outputs
- 2 digital inputs
- 2 digital outputs
| DB MCM300 DE EN |
Mobile Controls
In some special applications, an operating and control unit from Graf-Syteco can both take over the visualization and control the machine directly via the user program. This reduces costs because an additional PLC can be dispensed with.
In the majority of mobile machines, due to safety requirements, the processes are monitored and controlled by separate safety controllers (safety PLC).
Graf-Syteco devices have long been characterized by good interoperability with control systems via communication via CAN or Ethernet.
For application projects for the automation of mobile machines, we can offer various control systems in our product portfolio in cooperation with our competent cooperation partners.
The range extends from simple basic mobile controllers with 12 inputs, 6 outputs and interfaces such as CAN and Ethernet to complex safety controllers with various expansion boards with up to 136 inputs and outputs and a wide range of interfaces.
- Aurix TC299 Multicore 32 bit, 300 MHz
- 8 MB internal Flash, 16 MB external Flash
- 6 x CAN | 1 x RS232 | 5 x Ethernet
- 4 x 100 Mbit/s, optional 1 x 1 Gbit/s
- 2 MB RAM, 32 kB EEPROM
- 12 inputs (SENT support) and 6 outputs
- SIL2, PLd
- TriCore TC 1798 32 bit, 300 MHz
- 4MB Flash
- Compact, Ethernet on board
- 2 x CAN
- Optional LIN
- 16 inputs (SENT support) and 15 outputs
- SIL2, PLd
- TriCore TC 1798 32 bit, 300 MHz
- 4 MB Flash
- Compact, Ethernet on board
- 4 x CAN
- 28 inputs (SENT support) and 28 outputs
- SIL2, PLd
- TriCore TC 1796 32 bit, 150 MHz
- 6 MB Flash
- Expandable via expansion boards
- 4 x CAN
- Basic configuration with 15 inputs and 8 outputs
- Up to 65 in-/outputs
- SIL2, PLd
- TriCore TC 1796 32 bit, 150 MHz
- 6 MB Flash
- Expandable via expansion boards
- 4 x CAN | 1 x RS232
- Basic configuration with 28 inputs and 24 outputs
- Up to 136 in-/outputs