The operating and control units with 3.5" display are compact and prepared for the protected outdoor area or the cabin of construction machines, agricultural machines or municipal vehicles with a high protection class at the front. The operating and control unit is mounted in a standard 96 x 96 mm panel cut-out for measuring devices.
For input, the devices have 4 backlit touch (D1000L) or tactile (D1010L) keys that can be freely assigned with functions. All products have 2 CAN interfaces and a USB 2.0 host interface. In addition, there are basic versions without I/Os. The devices with I/Os have 4 digital inputs, 4 analog inputs and 2 digital PWM outputs. The creation of the visualization and the programming in C are done with the Graf-Syteco software GSe-VISU® or with Codesys. CANopen and J1939 are available as protocols, as well as OPC-UA, Modbus-TCP and Modbus RTU depending on the interface variant.
GSt-A043 series surface mount/flush mount units with 4.3" display are slim, rugged and prepared for outdoor or in-cab use on construction equipment, agricultural machinery or municipal vehicles with a high degree of protection. The very bright optically bonded display ensures clear readability even in direct sunlight and at unfavorable reading angles. Operator input is via four freely assignable, color-backlit, tactile function keys and four navigation keys.
The operating and control unit is installed in surface mounting using a RAM holder and in recessed mounting using a clamping bracket.
The creation of the visualization and the programming in C are done with GSe-VISU®. Alternatively CODESYS target visualization is available.
The GSt-A043 is offered in different product variants.
The built-in units with 5.7" display are programmable operating and control units for operating control and parameterization of mobile machines and plants. They can be used stand-alone or in combination with a control system. Data is reliably transmitted via the available interfaces. Sensor data can be acquired and machine functions can be controlled.
The products are prepared for installation in the protected outdoor or cabin area of construction machines, agricultural machines or municipal vehicles. The operating and control unit is mounted with a clamping bracket.
The creation of the visualization and the programming in C are done with GSe-VISU®. Alternatively CODESYS target visualization and programming language ST are available. The operating system GSe-OS® is Linux-based, which allows a short boot time.
The built-in or surface-mounted products with 7" display are programmable for the operation, control and parameterization of mobile machines and plants. Data is reliably transmitted and machine functions controlled via the existing interfaces.
The operating and control units have freely programmable, backlit, tactile function and navigation keys. The products are prepared for installation and surface mounting in the protected outdoor area or in the cab area of construction machines, agricultural machines or municipal vehicles. Mounting is done via a RAM holder or with a clamping bracket.
The GSt-E101 operating and control unit is equipped with a very bright, optically bonded 10.1 inch display with a very wide reading angle. Thanks to its die-cast aluminum housing with a high degree of all-round protection, it is suitable for use outdoors and in cabins. Even in direct sunlight, the display is optimally readable.
The GSt-E101 is characterized by its intelligent cabling concept with clean cable routing along the RAM holder on the back. The rear cover of the connectors can be customized with your logo. The front foil design and the housing color can be customized and increase the attractiveness when looking into the booth.
The MCQ6001L operating and control unit is equipped with a very bright, 10.4-inch display with a good reading angle. It is suitable as a built-in device for use in dashboards in the cabin area, as well as in protected outdoor areas. The display is also easy to read in direct sunlight.
The MCQ6001L is characterized by the fact that control functionality and visualization are combined in one device. Via the rear connections for interfaces, I/Os and cameras, the direct control of actuators of the superstructure, the reading of sensors and the communication with components of Graf-Syteco and other manufacturers takes place.
The MCQ6001L is now equipped with twice as much memory and an (optional) touch screen. Its fast boot time is due to its Linux-based GSe-OS® operating system, newly adapted to the revised hardware.